Knowledge Booster: S & T Signal Edition (26 Feb 2026)
Welcome to today's S & T Signal Knowledge Booster! We've handpicked 10 essential questions from our database to help you sharpen your skills. Dive in and test your knowledge!
Q1. Tender committee and Accepting authority for single tenders should be निविदा समिति और एकल निविदाओं के लिए स्वीकृति प्राधिकारी को यह निर्धारित करना चाहिए कि
- A) Same level committee as for open tenders
- B) One step above normal tenders
- C) Two steps above the normal tenders
- D) Level to be decided by GM
Correct Answer: One step above normal tenders
Explanation: Explanation : 70% ASTE 2024
Q2. The Stationary unit of Kavach generates Movement Authority which is transmitted to the train via ? कवच की स्टशनरी यिनट, मवमट अथॉ रटी उत्पन्न करती ह िजस िकसक माध्यम स टन तक टासिमट िकया जाता ह? कवच की स्थिर इकाई मूवमेंट अथॉरिटी उत्पन्न करती है जो ट्रेन में संचारित होती है? कवच की स्थिति, मवमत एथो रति उत्पन्न होती है, इसक माध्यम स टन तक तासीमत इक्या जाता है?
- A) LTE एलटीई
- B) UHF यएचएफ
- C) GPRS जीपीआरएस
- D) RFID tags आरएफआईडी टग
Correct Answer: UHF यएचएफ
Explanation: Explanation : The of KAVACH (typically located at station interlocking areas) generates and transmits it to the train via:
Q3. The frequency band allotted for the use of Indian Railways for loco troll is__________________. ASTE 70% 2025. भारतीय रेलवे द्वारा लोकोट्रॉल के लिए आवंटित आवृत्ति बैंड __________________ है। ASTE 70% 2025.
- A) 400 - 425
- B) 424-430
- C) 475-490
- D) none of the options
Correct Answer: 424-430
Explanation: Explanation : Purpose / System Frequency Band
Q4. In workshops, Allowed time for a particular job is _______ कारखा नों नों में में कि सी वि शे शेष का र्य र्य के के लि ए स्वी कृ कृ त समय _______ हो ता है है कार्यशालाओं में, किसी विशेष कार्य के लिए अनुमत समय _______ होता है कारखा नों नों में कि सी वि शेष का रय रय के ली ए स्वि क्र क्र त समय _______ हो ता है
- A) Same as Normalized Time सामान्यीकृ कृतसमय के के समा न
- B) Normalized Time + all the additional allowances except allowance to cover Fatigue
- C) Normalized Time + all the additional allowances
- D) None of the options
Correct Answer: Normalized Time + all the additional allowances
Explanation: Explanation : CBT ASTE 2025
Q5. In single line RE Area, what is the maximum permissible length between Point contactor and Point motor of IRS S‐24 Point machine having AC immunity level of 160 Volt (consider factor of safety as 1.5)? सिंगल लाइन आरई एरिया में, 160 वोल्ट के एसी इम्युनिटी लेवल वाली आईआरएस एस-24 पॉइंट मशीन के पॉइंट कॉन्टैक्टर और पॉइंट मोटर के बीच अधिकतम अनुमेय लंबाई क्या है (सुरक्षा गुणांक को 1.5 मानें)?
- A) 2200 Metre
- B) 2800 Metre
- C) 1100 Metre
- D) 910 Metre
Correct Answer: 910 Metre
Explanation: Explanation : Factor of safety is 1.5 Type of Machine
Q6. At what stage will interlocking between conflicting routes is achieved by means of a route interlocking electric circuit? परस्पर विरोधी मार्गों के बीच अंतर्संबंध किस चरण में मार्ग अंतर्संबंध विद्युत परिपथ के माध्यम से प्राप्त किया जाएगा?
- A) Initiation stage.
- B) Control Stage
- C) Checking Stage
- D) Locking Stage
Correct Answer: Initiation stage.
Explanation: Explanation : The interlocking between conflicting routes shall be achieved through route interlocking electric circuits at route initiation stage.and also The points are correctly set and locked in the route including overlap and isolation (if any) to desired position,The crank handle keys for all the motor operated points in the route, overlap and isolation are locked and their control is not released,All interlocked level crossing gates are closed and locked against the road traffic in the route and overlap, if any, shall be proved in Signal Clearance only,Stop signal ahead is not blank.
Q7. An employee works 42 hours per week and with 30 consecutive hours of rest comes under एक कर्मचारी प्रति सप्ताह 42 घंटे काम करता है और 30 घंटे लगातार आराम करता है। यह निम्न श्रेणी में आता है
- A) Excluded
- B) Intensive
- C) Essential intermittent
- D) Continuous
Correct Answer: Intensive
Explanation: Explanation : megger-insulation resistance of underground cables. OTDR-
Q8. For the pupose of use in Kavach, frequency Bands allotted in Indian Railways is कवच में में प्रयो ग के के उद्दे द्देश्य के के लि ए भा रती य रे रे लवे वे में में आबं बंटि त फ़्री क्वें क्वें सी बैं बैंड क्या है है ? कवच में उपयोग के उद्देश्य से, भारतीय रेलवे में आवृत्ति बैंड आवंटित किए गए हैं कवच में प्रोयो गा के उद्दे ददेश्य के के ली ए भा रति या रे रे लवे वे में आबं बंटी त फ्राय क्वें क्वें सी बैन बैंड क्या है?
- A) 405-512 MHz
- B) 370-430 MHz
- C) 424 - 430 MHz
- D) none of the options
Correct Answer: 405-512 MHz
Explanation: Explanation : KAVACH / DPWCS
Q9. Double Yellow ('YY') aspect of a second distant signal in a double distant MACLS territory will indicate to the driver? दोहरी दूरी वाले MACLS क्षेत्र में दूसरे दूरस्थ सिग्नल का दोहरा पीला ('YY') पहलू चालक को क्या संकेत देगा?
- A) Loop line reception
- B) Run through via loop line
- C) Stop at home signal
- D) All options are correct
Correct Answer: Loop line reception
Explanation: Explanation : delet
Q10. In double line block instrument, type of relay to be used in the line circuit for block working is ______________. डबल लाइन ब्लॉक इंस्ट्रूमेंट में, ब्लॉक वर्किंग के लिए लाइन सर्किट में उपयोग किए जाने वाले रिले का प्रकार ______________ है।
- A) Q style latch relay
- B) DC 3 position polarised line relay
- C) QSPA
- D) none of the options
Correct Answer: DC 3 position polarised line relay
Explanation: Explanation : Resistance: last stop signal
0
0
Best portal for railway departmental exam
mycbt.in - join free
Comments 0
Post CommentNo comments yet. Be the first to comment!